Discussion:
Eric Gorr....always late!
(too old to reply)
milwaukeeater fu
2022-07-18 20:34:33 UTC
Permalink
Speaking of being late to the party! <G>
Eric did the porting and carb work on my 91 RM250, back in 1992. I sent
him the cylinder, head and carb. I love what these mods did to the
bike, except for the first time I rode it. I mean, I loved them right
away, but the new snap in the motor almost spit me off. <G>
None of the mods made the bike more touchy or unreliable. I did have a
bit of a problem getting the jetting dialed in, but I'm not the world's
greatest at that to begin with. That's why I have mechanic friends!
<G> Also, a quick call to Mr. Gore and I was spot on!
I know that he did my porting himself, when he was associated with Tuf.
Racing. I know this because I got a call from him asking about what I
was looking for in the porting!
I'm extremely happy with the work and he will get the work on my next
bike, when I manage to figure out where I am and where I'm gonna be for
the next year or two.
Steve B.
<<< snip commentary >>>
1) what have others in RMD had done by Eric and how do you like the
mods?
2) have the mods made your bike more 'touchy' or unreliable?
3) was it hard to get the jetting dialed in?
4) unless you are going to have bottom end work done, you just sent him
the cylinder and possibly carb, right? (I did see his price list)
5) does he do the work himself or does he have employees do it (and if
so, does he check it over after or is everyone that works there good)?
Thanks, Peter
--
http://www.minnesotamotocross.com
Motocross Rules!!
Peter 3 # 524
Peter # 739
ICQ#59437543
milwaukeeater fu
2022-07-18 20:34:43 UTC
Permalink
Speaking of being late to the party! <G>
Eric did the porting and carb work on my 91 RM250, back in 1992. I sent
him the cylinder, head and carb. I love what these mods did to the
bike, except for the first time I rode it. I mean, I loved them right
away, but the new snap in the motor almost spit me off. <G>
None of the mods made the bike more touchy or unreliable. I did have a
bit of a problem getting the jetting dialed in, but I'm not the world's
greatest at that to begin with. That's why I have mechanic friends!
<G> Also, a quick call to Mr. Gore and I was spot on!
I know that he did my porting himself, when he was associated with Tuf.
Racing. I know this because I got a call from him asking about what I
was looking for in the porting!
I'm extremely happy with the work and he will get the work on my next
bike, when I manage to figure out where I am and where I'm gonna be for
the next year or two.
Steve B.
<<< snip commentary >>>
1) what have others in RMD had done by Eric and how do you like the
mods?
2) have the mods made your bike more 'touchy' or unreliable?
3) was it hard to get the jetting dialed in?
4) unless you are going to have bottom end work done, you just sent him
the cylinder and possibly carb, right? (I did see his price list)
5) does he do the work himself or does he have employees do it (and if
so, does he check it over after or is everyone that works there good)?
Thanks, Peter
--
http://www.minnesotamotocross.com
Motocross Rules!!
Peter 3 # 524
Peter # 739
ICQ#59437543
almost a year since i sent in a jug.. have no idea what's going on with it, no answer on his phone, no communication, basically looks like im screwed and will have to find a very hard to find replacement top end!! fucme
john
2022-07-19 12:21:53 UTC
Permalink
Post by milwaukeeater fu
Speaking of being late to the party! <G>
Eric did the porting and carb work on my 91 RM250, back in 1992. I sent
him the cylinder, head and carb. I love what these mods did to the
bike, except for the first time I rode it. I mean, I loved them right
away, but the new snap in the motor almost spit me off. <G>
None of the mods made the bike more touchy or unreliable. I did have a
bit of a problem getting the jetting dialed in, but I'm not the world's
greatest at that to begin with. That's why I have mechanic friends!
<G> Also, a quick call to Mr. Gore and I was spot on!
I know that he did my porting himself, when he was associated with Tuf.
Racing. I know this because I got a call from him asking about what I
was looking for in the porting!
I'm extremely happy with the work and he will get the work on my next
bike, when I manage to figure out where I am and where I'm gonna be for
the next year or two.
Steve B.
<<< snip commentary >>>
1) what have others in RMD had done by Eric and how do you like the
mods?
2) have the mods made your bike more 'touchy' or unreliable?
3) was it hard to get the jetting dialed in?
4) unless you are going to have bottom end work done, you just sent him
the cylinder and possibly carb, right? (I did see his price list)
5) does he do the work himself or does he have employees do it (and if
so, does he check it over after or is everyone that works there good)?
Thanks, Peter
--
http://www.minnesotamotocross.com
Motocross Rules!!
Peter 3 # 524
Peter # 739
ICQ#59437543
almost a year since i sent in a jug.. have no idea what's going on with it, no answer on his phone, no communication, basically looks like im screwed and will have to find a very hard to find replacement top end!! fucme
respond to a 20 year old post? guess usenet never forgets...
what jug ya looking for, i can check my local shop.
john

Loading...